Polyethylene glycol-polyvinylidene fluoride/TiO₂ nanocomposite polymer coatings with efficient antifouling...

Capacitive deionization (CDI) is flourishing as an energy-efficient and cost-effective water desalination method. However, challenges such as electrode degradation and fouling have hindered the practical deployment of CDI technology. To address these challenges, the key point of our strategy is applying a hydrophilic coating composed of polyethylene glycol (PEG)-functionalized nano-TiO₂/polyvinylidene fluoride (PVDF) to the electrode interface (labeled as APPT electrode). The PEG/PVDF/TiO₂ layer not only mitigates the co-ion depletion, but also imparts the activated carbon (AC) electrode hydrophilicity. As anticipated, the APPT electrode possessed an enhanced desalination capacity of 83.54 μmol g^-1 and a low energy consumption of 17.99 Wh m^-3 in 10 mM sodium chloride solution compared with the bare AC electrode. Notably, the APPT maintained about 93.19 % of its desalination capacity after 50 consecutive adsorption-desorption cycles in the presence of bovine serum albumin (BSA). During the trial, moreover, no obvious overall performance decline was noted in concentration reduction (Δc), water recovery (WR) and productivity (P) over 50 cycles. This strategy realizes energy-efficient, antifouling and stable brackish water desalination and has great promise for practical applications.