Wavelength extension beyond 3 µm in a Ho³⁺/Pr³⁺ co-doped AlF₃-based fiber laser

In this Letter, we report continuous-wave (CW) lasers with wavelengths beyond 3 µm in homemade Ho³⁺/Pr³⁺ co-doped AlF₃-based glass fibers. The laser cavity was established through the integration of a dichroic mirror (DM, HR@3-3.1 µm) positioned at the pump end and a partial reflectivity (PR) fiber Bragg grating (FBG) situated at the laser emission end. The FBGs in AlF₃-based glass fibers were fabricated by a fs laser direct-writing method, and the resonant wavelengths were 3.009, 3.036, and 3.064 µm, respectively. Under the pump of 1.15 µm laser, a maximum unsaturated output power of 1.014 W was obtained at 3.009 µm with an overall laser efficiency of 11.8% and FWHM bandwidth of 0.88 nm. Furthermore, in order to enhance the optical-thermal stability, the FBG was heat-treated at 200°C for 30 min, and a higher output power of 1081 mW (348 mW without heat treatment) at 3.036 µm was achieved. To the best of our knowledge, this is the first demonstration of 3-3.1 µm lasers by using FBGs in Ho³⁺/Pr³⁺ co-doped AlF₃-based fibers.