Related Experiment Video
Updated: Jun 28, 2025

Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
Magneto-transport in the monolayer MoS2material system for high-performance field-effect transistor applications
Anup Kumar Mandia1, Rohit Kumar2, Seung-Cheol Lee3
1Indo-Korea Science and Technology Center (IKST), Jakkur, Bengaluru 560065, India.
None:
Electronic transport in monolayer MoS2is significantly constrained by several extrinsic factors despite showing good prospects as a transistor channel material. Our paper aims to unveil the underlying mechanisms of the electrical and magneto-transport in monolayer MoS2. In order to quantitatively interpret the magneto-transport behavior of monolayer MoS2on different substrate materials, identify the underlying bottlenecks, and provide guidelines for subsequent improvements, we present a deep analysis of the magneto-transport properties in the diffusive limit. Our calculations are performed on suspended monolayer MoS2and MoS2on different substrate materials taking into account remote impurity and the intrinsic and extrinsic phonon scattering mechanisms. We calculate the crucial transport parameters such as the Hall mobility, the conductivity tensor elements, the Hall factor, and the magnetoresistance over a wide range of temperatures, carrier concentrations, and magnetic fields. The Hall factor being a key quantity for calculating the carrier concentration and drift mobility, we show that for suspended monolayer MoS2at room temperature, the Hall factor value is around 1.43 for magnetic fields ranging from 0.001 to 1 Tesla, which deviates significantly from the usual value of unity. In contrast, the Hall factor for various substrates approaches the ideal value of unity and remains stable in response to the magnetic field and temperature. We also show that the MoS2over an Al2O3substrate is a good choice for the Hall effect detector. Moreover, the magnetoresistance increases with an increase in magnetic field strength for smaller magnetic fields before reaching saturation at higher magnetic fields. The presented theoretical model quantitatively captures the scaling of mobility and various magnetoresistance coefficients with temperature, carrier densities, and magnetic fields.
More Related Videos
Related Concept Videos
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

