Tuneable quantised conductance memory states in TiO₂based resistive switching devices in crossbar geometry for high...

The tunability and controllability of conductance quantization mediated multilevel resistive switching (RS) memory devices, fabricated in crossbar geometry can be a promising alternative for boosting storage density. Here, we report fabrication of Cu/TiO₂/Pt based RS devices in 8 × 8 crossbar geometry, which showed reliable bipolar RS operations. The crossbar devices showed excellent spatial and temporal variability, time retention and low switching voltage (<1 V) and current (∼100μA). Furthermore, during the reset switching, highly repeatable and reliable integral and half-integral quantized conductance (QC) was observed. The observed QC phenomenon was attributed to the two dimensional confinement of electrons as lateral width of the conducting filament (CF) matches the fermi wavelength. The magnitude and number of the QC steps were found to increase from ∼2.5 to 12.5 and from 5 to 18, respectively by increasing the compliance current (I_C) from 50 to 800μA which also increased the diameter of the CF from ∼1.2 to 3.3 nm. The enhancement in both number and magnitude of QC states was explained using electrochemical dissolution mechanism of CF of varying diameter. A thicker CF, formed at higherI_C, undergoes a gradual rupture during reset process yielding a greater number of QC steps compared to a thinner CF. The realisation of QC states in the crossbar Cu/TiO₂/Pt device as well asI_Cmediated tunability of their magnitude and number may find applications in high-density resistive memory storage devices and neuromorphic computing.