Sensitivity and stability improvement on slippery surface-aggregated substrate for trace heavy metals detection using...

The sensitive and stable detection of trace heavy metals in liquid is crucial given its profound impact on various aspects of human life. Currently, nanoparticle-enhanced laser-induced breakdown spectroscopy (NELIBS) with dried droplet method (DDM) is widely applied for heavy metals detection. Nevertheless, the coffee ring effect (CRE) in DDM affects the stability, accuracy, and sensitivity of NELIBS. Here, we developed a slippery surface-aggregated substrate (SS substrate) to suppress the CRE and enrich analytes, and form a plasmonic platform for NELIBS detection. The SS substrate was prepared by infiltrating perfluorinated lubricant into the pores of PTFE membrane. The droplet, with targeted elements and gold nanoparticles, was dried on the SS substate to form the plasmonic platform for NELIBS analysis. Then, trace heavy metal elements copper (Cu) and manganese (Mn) were analyzed by NELIBS. The results of Cu (RSD = 5.60%, LoD = 3.72 μg/L) and Mn (RSD = 7.42%, LoD = 6.37 μg/L), illustrated the CRE suppression and analytes enrichment by the SS substrate. The results verified the realization of stable, accurate and sensitive NELIBS detection. And the LoDs succeeded to reach the standard limit of China (GB/T 14848-2017). Furthermore, the results for groundwater detection (relative error: 5.92% (Cu) and 4.74% (Mn)), comparing NELIBS and inductively coupled plasma mass spectrometry (ICP-MS), validated the feasibility of the SS substrate in practical applications. In summary, the SS substrate exhibits immense potential for practical application such as water quality detection and supervision.