Study on time-frequency features of induced charge signals during the damage and failure process of coal medium

Monitoring and preventing coal-rock dynamic disasters are vital for safe mining. To investigate the time-frequency features of induced charge signals with coal damage and failure of roadways, the generation mechanism of free charge in loaded coal is analyzed and the induced charge monitoring test is conducted. According to the stress-induced charge-time curves, the time-domain features of charge signals at each loading stage are obtained. The wavelet threshold denoising approach and generalized Morse wavelet transform method are applied to denoise the raw signals and study the frequency-domain features. Further, the quantitative relationship between the de-noised induced charge signals and the degree of coal damage is established. The results show that the event number, amplitude and fluctuation degree of available induced charge signals are all at a low level in the compaction and elastic stages of the coal, which are mainly generated by the piezoelectric effect and predominantly represent discreteness. When entering the plastic and failure stages, the available signals are primarily produced by the crack propagation and triboelectric effects, with a significant increase in the event number, amplitude, and fluctuation degree. Then the induced charge signals gradually transit from discrete to continuous. Generally, the dominant frequency of the available induced charge signals during the coal damage process is concentrated at 0 ~ 11 Hz. The available induced charge is positively correlated with the degree of coal damage, which can perform the damage degree of coal mass, providing a new approach to evaluate the stability of roadway surrounding rocks.