Superhydrophobic foam combined with biomass-derived TENG based on upcycled coconut husk for efficient oil-water...

The ocean ecological environments are seriously affected by oil spilling and plastic-debris, preventing and significantly reducing marine pollution via using biocomposite production from natural fiber reinforcement is a more friendly way to deal with marine oil pollution. Herein, we upcycled coir-coconut into lignin and coconut shell into spherical TENG by a combination of dip-dry and chemical treatment and used the SiO₂ nanoparticles together with cellulose nanofibrils to prepare serial sugar-templated, anisotropic and hybrid foams. The as-prepared lignin/SiO₂ porous sponge (LSPS) with a hierarchical porous morphology and uniformly dispersed nanoparticles structure benefits from the advantages of biomass-based additives, which presents reversible large-strain deformation (50%) and high compressive strength (11.42 kpa). Notably, the LSPS was significantly more hydrophobic (WCA ≈150°) than pure silicone-based foams, and its selective absorbability can separate oil from water under continuous pumping. Meanwhile, the coconut husk was also upcycled as a spherical TENG shell by a combination of the nanofiber-enhanced polymer spherical oscillator (CESO), which possessed high triboelectric properties (U_oc = 272 V, I_sc = 14.5 μA, Q = 70 nC) and was comparable to the plastic shell TENG at low frequency (1.6 Hz). The monolithic foam structure developed using this clean synthetic strategy holds considerable promise for new applications in sustainable petroleum contamination remediation.