Investigation of mechanical behavior of glass fiber reinforced extruded polystyrene core material composites

Layered composites are composite materials created by combining different layers of materials. Each layer can possess unique properties, often tailored to meet specific application or design requirements. These composites have found applications in various sectors due to their features, which include lightness, excellent impact properties, and customization according to specific application areas. In this study, glass fiber reinforced polymer foam core layered composite materials were produced. EPS polymer foam was used as the core material. During production, polymer foams and fibers were bonded to the upper and lower sides of the foams using resin. Samples were produced with 4 and 6 layers on both sides, totaling 8 and 12 layers, respectively. The vacuum bagging method was employed in production, utilizing the manual laying technique. Upon completion of production, the materials were cut into sizes conforming to standards and converted into samples. Subsequently, three-point bending and low-speed impact tests were conducted on the produced samples. As a result of the impact tests, perforation occurred in the 8-layer samples of 200 g m^-2 glass fiber composites, while rebound was observed in the 12-layer samples. Although more deformation occurred in the 8-layer glass fiber composites of 300 g m^-2 than in the 12-layer samples, both sets of experiments resulted in rebound. Similar results to the impact tests were obtained in three-point bending tests, with higher strengths observed in the 12-layer samples compared to the 8-layer samples. Composite samples with fiber layers of 300 g m^-2 exhibited better performance than samples with 200 g m^-2 fibers.