Mineral Acid Co-Extraction in Reactive Extraction of Lactic Acid Using a Thymol-Menthol Deep Eutectic Solvent as a...

Carboxylic acids can be isolated from fermentation broths using reactive liquid-liquid extraction, offering an alternative to the environmentally harmful state-of-the-art process of precipitating calcium lactate. To enhance the sustainability of liquid-liquid extraction processes, greener solvents, such as natural deep eutectic solvents, are investigated. However, fermentation broths often exhibit pH values unsuitable for carboxylic acid extraction, which can be adjusted using mineral acids, though mineral acids may be co-extracted. In this study, we systematically examine the co-extraction of hydrochloric, nitric, sulfuric, and phosphoric acid during extraction and back-extraction of lactic acid. The solvent phase consisted of tri-n-octylamine, trioctylphosphine oxide, or tributyl phosphate diluted in a thymol-menthol deep eutectic solvent. The back-extraction was conducted using a diluent swing with p-cymene as the antisolvent and water as the receiving phase. Tri-n-octylamine showed the highest efficiency for lactic acid (up to 29.8%) but also the highest co-extraction of mineral acids (up to 50.9%). In contrast, trioctylphosphine oxide exhibited a lower but more selective lactic acid extraction (5.94%) with low mineral acids co-extraction (0.135%). Overall, the highest co-extraction was observed for phosphoric acid and the lowest for nitric acid. In conclusion, the selected solvent phase composition and mineral acid influence the co-extraction and, thus, final product purity. The successful application of the natural deep eutectic solvent as the modifier enhances the sustainability of liquid-liquid extraction processes.