Innovative plasticization technique for talc-powder reinforced wheat-starch biomass composite plastics with enhanced...

N-methyl-morpholine-N-oxide (NMMO) was initially created as a plasticizer for starch to produce thermoplastic wheat starch. Subsequently, talc powder was used as a reinforcing filler to enhance the mechanical strength of thermoplastic biomass-based composite plastics. The chemical structure, crystal structure, and microscopic morphology were analyzed using Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Additionally, the thermal properties were explored through thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. The hydrated NMMO plasticizer demonstrated an outstanding plasticizing effect on starch, resulting in a composite with remarkable mechanical properties. In fact, the pure thermoplastic wheat starch plasticized with hydrated NMMO exhibited the highest mechanical strength recorded so far, with a tensile strength of up to 9.4 MPa. In addition, talcum powder displayed a noticeable reinforcing effect. When the talcum powder content reached 30 wt%, the targeted composite achieved a tensile strength of 20.5 MPa and a Young's modulus of 177.9 MPa. These values were 118 % and 48 % higher, respectively, than those of the pure thermoplastic starch sample. This innovative plasticizing method opens up a new avenue for the development of high-mechanical-strength thermoplastic biomass-based composite plastics with promising potential applications.