Related Experiment Video
Updated: Jun 27, 2025

Watershed Planning within a Quantitative Scenario Analysis Framework
Published on: July 24, 2016
Pollution sources apportionment and suitability assessment of Lah River, Ethiopia: Conjunctive application of
Zelalem Abera Angello1, Mentwabe Asiratu Mengist2
1Arba Minch Water Technology Institute, Arba Minch University, P.O. Box 21, Arba Minch, Ethiopia
Abstract:
This study aimed to assess spatiotemporal water quality variation and its suitability for irrigation and domestic purposes in Lah River using the irrigation water quality index (IWQI) and the weighted arithmetic water quality index (WAWQI). The IWQI analysis result showed that the sodium absorption ratio, residual sodium carbonate, potential salinity, Kelly index, magnesium ratio, sodium percentage, and permeability index were found to be 1.07 mEq/L, -0.43 mEq/L, 0.8 mEq/L, 0.78 mEq/L, 43.01%, 42.95%, and 63.46%, respectively. The IWQIs revealed that the water quality of the river was appropriate for agricultural use during the dry season. Furthermore, the calculated WAWQI of the river water ranged from 123.13 to 394.72 during the wet season, indicating the high pollution levels in the Lah River and incompatibility for drinking purposes. On the other hand, the principal component analysis identified two pollution sources during the wet season and three during the dry season. In addition, the positive matrix prioritization model predicted the pollution source's contribution quite well with a signal-to-noise ratio of >2 and a residual error between -3 and 3 for both seasons. This study suggests that water quality of Lah River is degrading periodically necessitating proper pollution management.
Related Concept Videos
Sampling Plans
Random sampling is a method where each member of the population has an equal chance of being selected for the sample. It involves selecting individuals randomly, often using random number generators or lottery-type methods. For example, when analyzing the properties of a...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...

