Optimization of Desalination Efficiency and Exploratory Applications of TiO₂ Active Site Electrode Enhanced by...

Capacitive deionization (CDI) is an emerging desalination technology for seawater desalination. The development of high-desalination and long-life electrode materials is a research focus in the global water treatment field. In this experiment, Tween T80 was used as a surface activator, and a modified electrode was prepared by facilitating the deposition of TiO₂ active sites onto the surface of activated carbon through a sol-gel/hydrothermal two-step synthesis strategy. The morphology and specific surface area of the composite material were analyzed through scanning electron microscopy, specific surface area measurements, and contact angle tests. The results indicated that the sol-gel/hydrothermal two-step synthesis strategy played a crucial role in the homogeneous combination and performance enhancement of the composite material. Under constant voltage mode, when the working voltage was 1.2 V, the desalination capacity of this composite material in a NaCl solution with an initial conductivity of 3000 μS·cm^-1 reached 23.8 mg·g^-1 (26% higher than materials prepared by conventional sol-gel methods). After 150 cycles, the capacity retention rate was 78%, and the retention capacity was significant (87%). Overall, the results demonstrate the potential of the sol-gel/hydrothermal two-step synthesis strategy in preparing high-performance CDI electrode materials. The modified electrode prepared using this method offers enhanced desalination capacity and durability, making it a promising candidate for seawater desalination and other water treatment applications.