Fabrication of Efficient and Simple-Structured Perovskite Solar Cells Using a Multifunctional Biocolina Surface...

The electron transport layer (ETL)-free perovskite solar cells (PSCs) have gained significant interest by simplifying the manufacture process and reducing the time/energy required for the fabrication of ETLs. Unfortunately, the performance of these ETL-free PSCs still lags behind those of the conventional counterparts due to the slow electron extraction and undesired interfacial charge recombination loss at the buried interface. In this work, a facile and multifunctional biocolina thin layer is incorporated on the bottom electrodes to regulate the interface energy level alignment by forming an interface dipole layer, resulting in a suppressed nonradiative recombination and an improved charge extraction. Furthermore, the biocolina thin layer possess the capability to passivate the surface defects within the perovskite films while simultaneously facilitate the formation of perovskite crystals. Consequently, a remarkable enhancement in photovoltaic performance is observed in the biocolina-based ETL-free PSCs with an increase from 15.96 % to an outstanding 20.01 %. Additionally, the biocolina extends the stability and relieves the hysteresis effect through the interface defect passivation and inhibition of interface charge accumulation. This research contributes to the development of cost-effective, simplified designs for highly efficient ETL-free PSCs by modifying the bottom electrodes.