Zincblende InAsP_1-/InP Quantum Dot Nanowires for Telecom Wavelength Emission

InAsP_1- quantum dots (QDs) in InP nanowires (NWs) have been realized as a platform for emission at telecom wavelengths. These QDs are typically grown in NWs with the wurtzite crystal phase, but in this case, ultrathin diameters are required to achieve defect-free heterostructures, making the structures less robust. In this work, we demonstrate the growth of pure zincblende InAsP_1- QDs in InP NWs, which enabled an increase in NW diameters to about 45 nm, achieved by employing Au-assisted vapor liquid solid growth in a chemical beam epitaxy system. We studied the growth of InP/InAsP_1- heterostructures with different compositions to control the straight growth along the ⟨100⟩ direction and to tune the emission wavelength. Interestingly, we found that the growth mechanism for pure InAs QDs is different compared to that for InAsP_1- alloy QDs. This allowed us to optimize different growth protocols to achieve straight growth of the final QD NWs. We successfully obtained the growth of InAsP_1- QDs with a composition in the range of x = 0.24-1.00. By means of microphotoluminescence measurements, we demonstrate the tunability of the emission in dependence of the InAsP_1- QD composition and morphology, remarkably observing an emission at the telecom O-band for a 10 nm thick QD with 80% of As content.