Hygrothermal Properties and Performance of Bio-Based Insulation Materials Locally Sourced in Sweden

In recent years, there has been a paradigm shift in the building sector towards more sustainable, resource efficient, and renewable materials. Bio-based insulation derived from renewable resources, such as plant or animal fibres, is one promising group of such materials. Compared to mineral wool and polystyrene-based insulation materials, these bio-based insulation materials generally have a slightly higher thermal conductivity, and they are significantly more hygroscopic, two factors that need to be considered when using these bio-based insulation materials. This study assesses the hygrothermal properties of three bio-based insulation materials: eelgrass, grass, and wood fibre. All three have the potential to be locally sourced in Sweden. Mineral wool (stone wool) was used as a reference material. Hygrothermal material properties were measured with dynamic vapour sorption (DVS), transient plane source (TPS), and sorption calorimetry. Moisture buffering of the insulation materials was assessed, and their thermal insulation capacity was tested on a building component level in a hot box that exposed the materials to a steady-state climate, simulating in-use conditions in, e.g., an external wall. The tested bio-based insulation materials have significantly different sorption properties to stone wool and have higher thermal conductivity than what the manufacturers declared. The hot-box experiments showed that the insulating capacity of the bio-based insulators cannot be reliably calculated from the measured thermal conductivity alone. The results of this study could be used as input data for numerical simulations and analyses of the thermal and hygroscopic behaviour of these bio-based insulation materials.