Related Experiment Video
Updated: Jun 26, 2025
A Facile and Eco-friendly Route to Fabricate PolyLactic Acid Scaffolds with Graded Pore Size
Published on: October 17, 2016
Modification of High-Density Polyethylene with a Fibrillar-Porous Structure by Biocompatible Polyvinyl Alcohol via
Alena Yarysheva1, Olga Arzhakova1
1Faculty of Chemistry, Lomonosov Moscow State University, Leninskie Gory 1-3, Moscow 119991, Russia.
Abstract:
Polymer/polymer nanocomposites based on high-density polyethylene (HDPE) and biocompatible polyvinyl alcohol (PVA) were prepared by tensile drawing of HDPE in the PVA solutions via environmental crazing. The mechanism of this phenomenon was described. The HDPE/PVA nanocomposites were studied by the methods of scanning electron microscopy, atomic force microscopy, gravimetry, tensile tests, and their composition, properties, and performance were characterized. The content of PVA in the HDPE/PVA nanocomposites (up to 22 wt.%) was controlled by the tensile strain of HDPE and concentration of PVA in the solution. Depending on the content of PVA, the wettability of the HDPE/PVA nanocomposite (hydrophilic-lipophilic balance) could be varied in a broad interval from 45 to 98°. The modification of HDPE by the biocompatible PVA offers a beneficial avenue for practical applications of the HDPE/PVA composites as biomedical materials, packaging and protective materials, modern textile articles, breathable materials, membranes and sorbents, etc.
More Related Videos
08:59A Freeze-Thawing Method to Prepare Chitosan-Polyvinyl alcohol Hydrogels Without Crosslinking Agents and Diflunisal Release Studies
Published on: January 14, 2020
10:09Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers
Published on: June 30, 2018
Related Concept Videos
01:14Polymer Classification: Architecture
01:21Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
01:20Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...