Related Experiment Video
Updated: Jul 5, 2026

Recombination Dynamics in Thin-film Photovoltaic Materials via Time-resolved Microwave Conductivity
Published on: March 6, 2017
Trenched microwave resonator integrated with porous PDMS for detection and classification of VOCs with enhanced
Zhiqiang Ma1, Mengyao Fu1, Chenyang Gao1
1College of Control Science and Engineering, Zhejiang University, Hangzhou 310027, China.
Abstract:
Microwave resonators combined with polymer absorption layers are widely used in volatile organic compound (VOC) detection based on their variable resonant frequencies. However, the response time is limited due to the polymer's slow volumetric absorption of VOC molecules. By constructing a porous structure in Polydimethylsiloxane (PDMS), resulting in reduced the response time to as short as 71.1%. To mitigate the sensitivity decline caused by the porous PDMS, a trenched-substrate complementary split-ring resonator (CSRR) is proposed for enhancing the interaction between the electromagnetic fields (EMFs) and the porous PDMS with VOCs. The removal of the substrate beneath CSRR's sensing region enhances the effective EMF, increasing frequency and amplitude sensitivities up to 175.5% and 137.8%, respectively. Responses to four common VOCs by the sensor show a maximum sensitivity of 217 Hz/ppm and a minimum limit of detection of 295 ppm. Additionally, resonant parameters and extracted lumped parameters are utilized to establish two decision-tree-based VOC classification models, achieving high accuracies of 98.71% and 99.59%, respectively. And the latter one fully utilizing responses throughout the swept band, proves superior in identifying similar substances. This sensor technology helps promote the sensitive detection and accurate classification of diverse VOCs.
Related Concept Videos
IR Frequency Region: Fingerprint Region
The...
Gas Chromatography: Types of Detectors-II
High-Performance Liquid Chromatography: Types of Detectors
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Automated Microbial Diagnostics

