Study on the Wettability and Methane Desorption Characteristics of Coal under High Pressure with Different...

In the process of coalbed methane extraction, due to the strong hydrophilicity of coal, the surface interaction force between water and the coal matrix is strong. The hydrophobic effect of the coal seam during drainage and pressure reduction is not significant, and adsorbed methane is difficult to desorb. In order to reduce the surface interaction force promoting methane desorption between water and coal, the surfactants NH766, G526, and D001 with a concentration of 0.1% were selected. A pressure of 12 MPa, which is close to that used for the on-site mining of coalbed methane in Baode, was selected as the experimental condition to simulate hydraulic fracturing of high fat coal, and the influence of different surfactants on methane desorption characteristics was analyzed. Combining contact angle experiments and infrared spectroscopy experiments, we explored the changes in wettability of the coal samples. We compared the changes in wettability and methane desorption characteristics and explored the similarities between these changes. The experimental results showed that after NH766 treatment, the content of oxygen-containing functional groups in coal rock decreased by 30%, and the contact angle of the coal matrix surface increased by 10°. Furthermore, its hydrophobicity was enhanced, and the desorption amount increased by 24%. In contrast, the oxygen-containing functional groups in coal rock after G526 and D001 treatments increased by 5% and 16%, respectively, and the contact angle of the coal matrix surface became smaller. Furthermore, its hydrophilicity was enhanced, and the desorption amount was reduced by 12.5% and 20%, respectively. NH766 reduces wettability and promotes methane desorption, and it can be applied to improve CBM extraction efficiency. G526 and D001 enhance wettability and inhibit methane desorption, which make them suitable for dust prevention and gas control in coal mines.