Synthesis, Optical Performance Characterization, and Durability of Electrospun PTFE-PEO Materials for Space...

Passive heat management is crucial in space, especially for extended missions involving protection from sunlight. Thermal coatings with desirable optical properties can drastically reduce the power consumed by active cooling systems, thereby reserving more resources for other critical systems onboard. Specifically, materials with wavelength-dependent reflectance and emittance are desirable for managing incident sunlight and self-cooling by thermal emission. This study demonstrates the use of polymer nanofibers, specifically poly(tetrafluoroethylene) (PTFE), for passive temperature control in space applications. This study describes the electrospinning fabrication process to create nanofibers and how process parameters can be varied to control the fiber geometry. We combine poly(tetrafluoroethylene) (PTFE) and poly(ethylene oxide) (PEO) polymers to fabricate highly reflective thermal control materials by electrospinning. To understand the role of material and fiber geometry, we measure spectral reflectance, absorptance, and transmittance using spectrophotometers interfaced with integrating spheres. We control the materials' fiber geometry and solar reflectance by modifying the solution properties, flow rate, rotating collector speed, and fabrication time. With 220-1560 μm thick electrospun nanofiber materials, we demonstrate an average solar reflectance of 94.73-99.75%, with values approaching 99.9% for thicker samples, which is among the highest for space applications. Meanwhile, a thermal emittance of 81.4% was observed at 300 K for a 3360 μm thick sample. The durability of these samples was also tested under ultraviolet light and atomic oxygen. Compared to the state-of-the-art materials, the electrospun PTFE-PEO fibers present a new paradigm for passive thermal management in space applications.