Parameterization of H₂SO₄ and organic contributions to volatile PM in aircraft plumes at ground idle

Volatile Particulate Matter (vPM) emissions are challenging to measure and quantify, since they are not present in the condensed form at the engine exit plane and they evolve to first form in the aircraft plume and then continue to grow and change as they mix and dilute in the ambient atmosphere. To better understand the issues associated with the initial formation and growth of vPM, a modeling study has been undertaken to examine several key parameters that affect the formation and properties of the vPM that is created in the initial cooling and dilution of the aircraft exhaust. A modeling tool (Aerosol Dynamic Simulation Code, ADSC) that was developed and enhanced over a series of past research projects supported by NASA, DoD's SERDP/ESTCP, and FAA was used to perform a parametric analysis of vPM. The parameters of fuel sulfur content (FSC), emitted condensable hydrocarbon (HC) concentrations, and the species profile of the HCs were used to construct a computational matrix that framed a wide range of expected parameter values. This computational matrix was executed for two representative commercial aircraft engines at ground idle and results were obtained for distances of 250 m and 1000 m downstream. From prior results, the most significant vPM emissions occur at the lowest power settings, so an engine power condition of 7% rated thrust was used. A primary goal of the parametric study is to develop an updated vPM modeling methodology and also to help interpret data collected in experimental campaigns. The parameterization proposed here allows the vPM emission composition and particle numbers to be estimated in greater detail than current methods. The aim is to provide additional understanding on how the vPM properties vary with fuel and engine parameters to increase the utility of vPM predictions.Implications: Volatile Particulate Matter (vPM) is an important contribution to the total PM emitted by aviation engines. While vPM is not currently a part of engine emissions certification regulations, vPM is used in aviation environmental impact assessments and for air quality modeling in and around airports. Current methods in use, such as FOA, were developed before many recent advances in experimental data acquisition and in understanding of vPM processes. The parameterization proposed here allows the vPM emission composition and particle numbers to be estimated in greater detail than current methods. These estimates can be used to develop inventories and provide a better estimate of total emission for most aviation engines. Its use in international regulatory tools can inform possible future regulatory actions regarding vPM.