Related Experiment Video
Updated: Jun 25, 2025
Sampling, Sorting, and Characterizing Microplastics in Aquatic Environments with High Suspended Sediment Loads and Large Floating Debris
Published on: July 28, 2018
Effect of particle density on microplastics transport in artificial and natural porous media
Wang Li1, Giuseppe Brunetti2, Anastasiia Bolshakova1
1University of Natural Resources and Life Sciences, Vienna, Department of Water, Atmosphere and Environment, Institute of Soil Physics and Rural Water Management, Muthgasse 18, 1190 Vienna, Austria.
Abstract:
The occurrence and persistence of microplastics (MPs) in natural environments are of increasing concern. Along with this, the transport of MPs in sediments has been investigated mainly focusing on the effect of plastic size and shape, media size effect, and solution chemistry. Yet, the influence of particle density is only partially understood. Therefore, column experiments on the transport of variably buoyant MPs in saturated natural sediments and glass beads were conducted, and transport parameters were quantified using a two-site kinetic transport model with a depth-dependent blocking function (the amount of retained MPs does not decrease at a constant rate with increasing depth, the majority of MPs were retained near the column inlet). Neutral, sinking, and buoyant MPs within the same size range were selected, with stable water isotope applied as conservative tracer to explore water and MP movement in the tested sediments. The results showed that 95.5 ± 1.4% of sinking MPs remained in columns packed with gravel, followed by buoyant and neutral MPs, thus indicating that particle density does affect MP mobility. Similar recovered amounts of MPs were found in columns packed with glass beads, indicating that tested sediment types do not affect the deposition behavior of MPs. The breakthrough curves of MPs were accurately described by the selected model. However, the simulated retention profiles overestimated the observed MP amount in layers closest to the column inlet. The coupled experimental and modeled results suggest an enhanced retention of sinking MPs, while neutrally and buoyant MPs exhibit a higher mobility in comparison. Thus, neutral or buoyant MPs can potentially pose a higher contamination risk to subsurface porous media environments compared to sinking MPs. Discrepancies between observed and simulated retention profiles indicate that future model development is needed for advancing the MP deposition as affected by particle density.
