Nanocomposites Derived from Construction and Demolition Waste for Cement: X-ray Diffraction, Spectroscopic and...

In the production of cement, raw materials can be partially substituted by regenerable waste provided from glasses, construction and demolition waste in order to reduce the environmental problem and burden of landfills. In this study, limestone-silicate composites were synthesized using starting materials such as glass waste and lime, brick, autoclaved aerated concrete (ACC), mortar or plaster waste. The structure and mechanical properties of the nano-composite materials have been studied. The mean CaCO₃ crystallite sizes are higher for composites containing ACC and brick than for doping with lime, mortar and plaster. Cement-based materials are formed by replacing 2.5% of the Portland cement with limestone-silicate composites. The results indicate new possibilities for introducing 2.5%of composites in cement paste because they promote the formation of the C-S-H network, which provides strength and long stability for the cement paste. The influence of varied types of mix composites in the expired cement on the initial cracking strain and stress, tensile strength and compressive strength were investigated. The compressive strength values of composite-expired cement specimens are situated between 11.8 and 15.7 MPa, respectively, which reflect an increase from 22.9 up to 63.54% over the compressive strength of expired cement matrix.