Optimal Preparation and Performance Study of Eco-Friendly Composite Chemical Dust Suppressants: A Case Study in a...

To mitigate dust pollution generated during various stages of construction activities and reduce the environmental and health hazards posed by airborne dust, this study utilized hydroxyethyl cellulose, glycerol, and isomeric tridecyl alcohol polyoxyethylene ether as raw materials to formulate a composite chemical dust suppressant. The properties of the dust suppressant were characterized through analysis. Employing single-factor experiments, the optimal proportions of the binder, water-retaining agent, and surfactant for the composite dust suppressant were determined. Subsequently, a response surface model was established, and, after analysis and optimization, the optimal mass ratios of each component in the composite dust suppressant were obtained. Under optimal ratios, the physicochemical properties and wind erosion resistance of the composite dust suppressant were analyzed. Finally, the practical application of the suppressant was validated through on-site trials at a construction site. This study revealed that the optimal formulation for the dust suppressant was as follows: 0.2% hydroxyethyl cellulose, 2.097% glycerol, 0.693% isomeric tridecyl alcohol polyoxyethylene ether, and the remainder was pure water. The suppressant is non-toxic, non-corrosive, environmentally friendly, and exhibits excellent moisture retention and bonding properties compared to water. The research findings provide valuable insights for addressing dust pollution issues on construction sites.