Parametric Production of Prostheses Using the Additive Polymer Manufacturing Technology Multi Jet Fusion

This study aims to develop a procedure for the production of 3D-printed forearm prostheses (especially hard outer sockets). The production procedure is designed in the form of a parametric workflow (CAD model), which significantly speeds up the designing process of the prosthesis. This procedure is not fixedly dependent on the software (SW) equipment and is fully transferable into another SW environment. The use of these prostheses will significantly increase the comfort of their patients' lives. It is possible to produce prostheses faster and in larger amounts and variants by the usage of additive technology. The input for the own production of the prosthesis is a model of the internal soft socket of the patient. This soft socket (soft bed) is made by a qualified prosthetist. A 3D-scanned CAD model is obtained afterward using the scanning method by an automatic laser projector. An editable, parametric external socket (modifiable in any CAD format) is generated from the obtained 3D scan using a special algorithmic model. This socket, after the necessary individual modifications, is transferred to 3D printing technology and produced using powder technology Multi Jet Fusion (HP MJF). The result of the designed and tested procedure is a quickly editable 3D-printed outer socket (main part of prosthesis), which is able to fully replace the current long-fiber composite solution. Production of current solutions is relatively time-consuming, and only one piece is produced in a given time. The newly designed technology eliminates this. This study summarized the possibilities of speeding up the production of forearm prostheses (but not only these) by creating a parametric CAD model that is applicable to different patients.