Research on the Hot Straightening Process of Medium-Thick Plates Based on Elastic-Viscoplastic Material Modeling

With the continuous improvement in the strength of medium-thick plate materials, the hot straightening of plates at high temperatures is increasingly influencing the final defect characteristics of products. In the high-temperature hot straightening process, the temperature and straightening speed of the plate significantly influence its intrinsic material properties, which, in turn, affect the straightening characteristics of the plate. However, most current material models used in the straightening process do not consider the relationship between temperature and strain rate, which leads to an inaccurate characterization of the actual material structure. Additionally, the continuous reverse bending mechanics model for straightening does not account for the impact of different bending strain rates on the bending characteristics of the plate in the thickness direction. In this study, a numerical calculation method was employed to investigate the evolution process of stress and curvature in the roll-type hot straightening process of medium-thick plates. Experimental data and mathematical methods were utilized to develop a viscous plastic material model that accounted for temperature and strain rate. Furthermore, a cross-sectional continuous reverse bending model was established, taking into account the temperature and straightening speed, enabling a reasonable interpretation of the mechanical parameter behaviors of medium-thick plates during high-temperature straightening.