Mechanistic Understanding of Sieving Lithium Ions Using a Biobased Sorbent Technology for Sustainable Lithium...

Low-cost environmentally benign materials that can be produced in a large scale to extract lithium from brine resources could drive the lithium market toward a clean technology with high lithium recovery and production. Herein, we have investigated the utilization of a novel, environmentally benign, and low-cost biobased sorbent for the extraction of lithium from lithium-rich solutions. This biobased molecular sieving sorbent, iron(III)-tannate (Fe(III)-TA), belongs to a novel class of coordination polymer frameworks derived from a natural polyphenol-tannic acid (TA)-coordinated with iron(III) metal cations. Its lithium adsorption and kinetic isotherm studies conducted using lithium-rich aqueous solutions confirm the sorbent's dual function for lithium sieving via physisorption, chemisorption, and mass transfer diffusion processes. The adsorption equilibrium and kinetic isotherm models combined with the external and internal mass transfer diffusion models reveal a mechanistic pathway for lithium-ion adsorption. Aiding by forming a fluid film for external mass transfer diffusion of lithium ions, analytes adsorb onto the sorbent surface via physisorption and chemisorption followed by the internal mass transfer diffusion, occupying lithium ions in the sorbent's pores. The lithium adsorption efficiency studies conducted for brines with different concentrations of interference alkali and alkaline cations evidence that the sorbent's affinity for lithium ions strongly depends on the analyte concentration. The results evidence that the sorbent has the ability to lower the brine's salinity and significantly reduces the ratios of Mg/Li and Ca/Li by 4-fold and 10-fold, respectively, yielding lithium-rich solutions. Thus, implementing this innovative biobased sorbent technology as an add-in step into traditional lithium extraction and refining processes, one can design a cost-effective pathway to yield lithium-rich leachate by reducing the Mg/Li and Ca/Li ratio. Nonetheless, the present work demonstrates that Fe(III)-tannate is an effective multifunctional sorbent for sieving lithium from lithium-rich aqueous solutions as well as for desalinating brine resources to recover usable water. Thus, this biobased sorbent offers the possibility of effective application of lithium reclamation and remediation of brine, mitigating the environmental impact of brine discharge and large volume of freshwater usage for lithium extraction and refining.