Comparative performance of contact plate metod and swab method for surface microbial contamination on medical fabrics

The contact plate method is widely accepted and used in various fields where hygiene and contamination levels are crucial. Evidence regarding the applicability of the contact plate method for sampling fabric microbial contamination levels in real medical environments was limited. This study aimed to assess the applicability of the contact plate method for detecting microbial contamination on medical fabrics in a real healthcare environment, thereby providing a benchmark for fabric microbial sampling methods.

In a level three obstetrics ward of a hospital, twenty-four privacy curtains adjacent to patient beds were selected for this study. The contact plate and swab method were used to collect microbial samples from the privacy curtains on the 1st, 7th, 14th, and 28th days after they were hung. The total colony count on each privacy curtain surface was calculated, and microbial identification was performed.

After excluding the effects of time, room type, and curtain location on the detected microbial load, the linear mixed-effects model analysis showed that contact plate method yielded lower colony counts compared to swab method (P < 0.001). However, the contact plate method isolated more microbial species than swab method (P < 0.001). 291 pathogenic strains were isolated using the contact plate method and 133 pathogenic strains were isolated via the swab method. There was no difference between the two sampling methods in the detection of gram-negative bacteria (P = 0.089). Furthermore, the microbial load on curtains in double-occupancy rooms was lower than those in triple-occupancy rooms (P = 0.021), and the microbial load on curtains near windows was lower than that near doors (P = 0.004).

Contact plate method is superior to swab method in strain isolation. Swab method is more suitable for evaluating the bacterial contamination of fabrics.