Oxide-Encapsulated Silver Electrocatalysts for Selective and Stable Syngas Production from Reactive Carbon Capture...

Electrolysis of bicarbonate-containing CO₂ capture solutions is a promising approach towards achieving low-cost carbon-neutral chemicals production. However, the parasitic bicarbonate-mediated hydrogen evolution reaction (HER) and electrode instability in the presence of trace impurities remain major obstacles to overcome. This work demonstrates that the combined use of titanium dioxide (TiO₂) overlayers with the chelating agent ethylene diamine tetra-acetic acid (EDTA) significantly enhances the selectivity and stability of Ag-based electrocatalysts for bicarbonate electrolysis. The amorphous TiO₂ overlayers suppress the HER by over 50 % at potentials more negative than -0.7 V vs. RHE, increasing the CO faradaic efficiency (FE) by 33 % (relative). In situ surface-enhanced Raman spectroscopy (SERS) measurements reveal the absence of near-surface bicarbonate species and an abundance of CO₂ reduction intermediates at the Ag|TiO₂ buried interface, suggesting that the overlayers suppress HER by blocking bicarbonate ions from reaching the buried active sites. In accelerated degradation tests with 5 ppm of Fe(III) impurity, the addition of EDTA allows stable CO production with >47 % FE, while the electrodes rapidly deactivate in the absence of EDTA. This work highlights the use of TiO₂ overlayers for enhancing the CO : H₂ ratio while simultaneously protecting electrocatalysts from impurities likely to be present in "open" carbon capture systems.