Integrated high-precision monitoring method for surface subsidence in mining areas using D-InSAR, SBAS, and UAV...

The use of unmanned operations to monitor mining induced land subsidence is increasing. This study conducts a detailed comparative analysis of accuracy of measured ground deformation provided by Differential Interferometric Synthetic Aperture Radar (D-InSAR), Small Baseline Subset (SBAS), and Unmanned Aerial Vehicle (UAV) tilt photogrammetry with respect to levelling measurements. Based on such analysis we propose an integrated approach that combines multiple remote sensing methods to achieve a better global accuracy in the land subsidence monitoring in mining areas. Conducted at the Banji Coal Mine, this study collected subsidence data from April 10, 2021, to June 28, 2022, through D-InSAR, SBAS, and UAV techniques. After segmenting the subsidence basin into distinct zones, we qualitatively assessed each area with UAV-derived 3D models and quantitatively evaluated the precision of all applied techniques, benchmarking against leveling data. Our findings indicate that integrating D-InSAR, SBAS, and UAV technologies significantly enhances monitoring accuracy over any single method, demonstrating their combined effectiveness in different subsidence areas. Consequently, the synergistic integration of D-InSAR, SBAS, and UAV technologies, capitalizing on their complementary strengths, enables the achievement of intuitive, comprehensive, and high-precision monitoring of subsidence basins in mining areas.