Repetitive high-power discharge operation of a micro-laser triggered gas switch

A low-energy, diode-pumped, solid-state passively Q-switched laser operating at a wavelength of 1535 nm has been demonstrated to trigger gas switches. This technology has the potential to bring significant improvements to the operation and reliability of compact pulsed power drivers. Compact pulsed power drivers are often required to operate for hundreds to thousands of shots without maintenance; thus, the reliable operation of the laser triggered switch is significant for the adoption of this technology. A primary limiter of spark gap lifetime is electrode erosion. In the case of a laser triggered switch where the laser is focused on one electrode, an additional source of erosion is the direct ablation of the electrode material by the laser. The micro-laser used in the previous experiments is very low energy, but over thousands of shots, it does damage directly to the target electrode. This damage could potentially interact with the erosion due to the current discharge and impact the operation of the switch. The focus of this paper is to describe experiments undertaken to assess this damage and quantify its effect on switch operation over many discharges at current and energy levels relevant to compact pulsed power systems.