Related Experiment Video

Updated: Jun 24, 2025

Measuring Light-Switching Behavior Using an Occupancy and Light Data Logger
05:50

Measuring Light-Switching Behavior Using an Occupancy and Light Data Logger

Published on: January 16, 2020

5.8K

CLEMD, a circuit-level electrical measurements dataset for electrical energy management

Omar Al-Khadher1, Azharudin Mukhtaruddin2, Fakroul Ridzuan Hashim1

  • 1Faculty of Engineering, Universiti Pertahanan Nasional Malaysia, 57000, Sungai Besi, Kuala Lumpur, Malaysia.

Scientific Data
|June 6, 2024
PubMed

More Related Videos

A Simple Approach to Perform TEER Measurements Using a Self-Made Volt-Amperemeter with Programmable Output Frequency07:43

A Simple Approach to Perform TEER Measurements Using a Self-Made Volt-Amperemeter with Programmable Output Frequency

Published on: October 5, 2019

21.9K
Evaluating the Electrochemical Properties of Supercapacitors using the Three-Electrode System12:00

Evaluating the Electrochemical Properties of Supercapacitors using the Three-Electrode System

Published on: January 7, 2022

12.2K

Related Concept Videos

Electrical Energy01:10

Electrical Energy

Using electric appliances for a longer period of time consumes more electrical energy and results in a higher electric bill. The energy produced by the transfer of electrons from one point to another is known as electrical energy. If power is delivered at a constant rate, the electrical energy can be defined as the product of power used by the device for a period of time. The energy unit on electric bills is the kilowatt-hour, where one kilowatt-hour is equivalent to 3.6 × 106 joules.
1.2K
Electrical Power01:07

Electrical Power

Electric power is the product of current and voltage, represented in units of joules per second, or watts. For example, cars often have one or more auxiliary power outlets with which you can charge a cell phone or other electronic devices. These outlets may be rated at 20 amps and 12 volts, so that the circuit can deliver a maximum power of 240 watts. Consider a 25 Watt bulb and a 60 Watt bulb. The conversion of electrical energy produces heat and light, while the kinetic energy lost by the...
3.1K
Energy and Power Signals01:17

Energy and Power Signals

In an electrical system with a resistor, voltage and current signals facilitate the measurement of power and energy across the resistor. For a continuous-time signal, the total energy over a time interval is defined as the integral of the square of the signal's magnitude over that interval. Mathematically, this is expressed as:
281
Electric Circuit Elements01:21

Electric Circuit Elements

Circuit elements are the basic building blocks of an electric circuit. Essentially, an electric circuit is the interconnection of these elements. Within electric circuits, one can find two types of elements: passive and active. Active elements have the ability to generate energy, whereas passive elements do not. Passive elements include components like resistors, capacitors, and inductors, while active elements typically encompass generators, batteries, and operational amplifiers.
The most...
757
Average Power01:13

Average Power

In practical electrical applications, the concept of time-varying instantaneous power is not frequently utilized. Instead, focus shifts to the more practical quantity known as average power. Average power is determined by integrating the instantaneous power over a specified time period and subsequently dividing it by that duration.
589
Circuit Terminology01:14

Circuit Terminology

An electrical network is a system composed of interconnected elements, such as resistors, capacitors, inductors, and voltage or current sources. Unlike a circuit, an electrical network does not necessarily form a closed path. In other words, while all circuits can be considered networks due to their interconnected nature, not every network qualifies as a circuit.
A circuit, on the other hand, is also an interconnected system of electrical elements but must contain one or more closed paths.
636