Research on dust control technology and numerical simulation of conical guiding air curtain in fully mechanized...

The dust pollution caused by the operation of fully mechanized heading face poses a serious threat to the safety production of operators and working face. To reduce dust concentration at the fully mechanized heading face, this study analyzed dust samples collected from various positions to understand the particle size distribution characteristics. Based on these findings, a conical diversion air conditioning (CDAC) device was designed to create a radial air curtain for dust control in the roadway cross-section. Computational Fluid Dynamics (CFD) was then employed to investigate the airflow and particle dynamics when the cone-shaped deflector was in closed and open states. The results show that in the fully mechanized heading face, the dust distribution in the working area of the roadheader driver is relatively dense, and the dust particles with particle size ≤ 8 μm account for a large proportion. When the CDAC device is deployed, the axial airflow in the roadway is changed into a rotating airflow along the roadway wall, and an air screen is established in the working area of the roadheader driver to block the outward diffusion of dust. When the pressure air outlet is arranged 30 m away from the tunneling head, the pressure air volume is set to 400 m³/min, and the CDAC device can better form the air curtain barrier to block the dust particles. It provides a new method for effectively controlling the dust concentration of the fully mechanized heading face and directly ensuring the health of the roadheader driver.