Development of lignin hydrogel reinforced polypyrrole rich electrode material for supercapacitor and sensing...

The preparation of natural polymer-based highly conductive hydrogels with reliable durability for applications in supercapacitors (SCs) is still challenging. Herein, a facile method to prepare alkaline lignin (AL)-based polypyrrole (PPy)-rich, high-conductive PPy@AL/PEGDGE gel was reported, where AL was used as a dopant, polyethylene glycol diglycidyl ether (PEGDGE) as a cross-linking agent, and PPy as a conducting polymer. The PPy@AL/PEGDGE gel electrode materials with hollow structures were prepared by electrochemical deposition and chemical etching method and then assembled into sandwich-shaped SCs. Cyclic voltammetry (CV), galvanotactic charge discharge (GCD), electrochemical impedance spectroscopy (EIS) and cycling stability tests of the PPy@AL/PEGDGE SCs were performed. The results demonstrated that the SCs can achieve a conductivity of 25.9 S·m^-1 and a specific capacitance of 175 F·g^-1, which was 127.4 % higher compared to pure PPy (77 F·g^-1) electrode. The highest energy density and power density for the SCs were obtained at 23.06 Wh·kg^-1 and 5376 W·kg^-1, respectively. In addition, the cycling performance was also higher than that of pure PPy assembled SCs (50 %), and the capacitance retention rate can reach 72.3 % after 1000 cycles. The electrode materials are expected to be used as sensor and SCs devices.