Related Experiment Video
Updated: Jun 24, 2025

Evaluation of the Curing of Adhesive Systems by Rheological and Thermal Testing
Published on: July 3, 2020
Intrinsically reactive hyperbranched interface governs graphene oxide dispersion and crosslinking in epoxy for
Hefeng Li1, Cong Liu1, Jiabao Zhu1
1State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, PR China.
Abstract:
Enhancing the flame retardancy of epoxy (EP) resins typically entailed a trade-off with other physical properties. Herein, hyperbranched poly(amidoamine) (HPAA) and phytic acid (PA) were used to functionalize graphene oxide (GO) via electrostatic self-assembly in water to prepare a phosphorus-nitrogen functionalized graphene oxide nanosheet (PN-GOs), which could be utilized as high efficient flame-retardant additive of epoxy resin without sacrificing other properties. The PN-GOs demonstrated improved dispersion and compatibility within the EP matrix, which resulted in significant concurrent enhancements in both the mechanical performance and flame-retardant properties of the PN-GOs/EP nanocomposites over virgin EP. Notably, the incorporation of just 1.0 wt% PN-GOs yielded a 20.4, 6.4 and 42.7 % increases in flexural strength, flexural modulus and impact strength for the PN-GOs/EP nanocomposites, respectively. Furthermore, simultaneous reductions were achieved in the peak heat release rate (pHRR) by 60.0 %, total smoke production (TSP) by 43.0 %, peak CO production rate (pCOP) by 57.9 %, and peak CO2 production rate (pCO2P) by 63.9 %. This study presented a facile method for the design of GO-based nano flame retardants, expanding their application potential in polymer-matrix composites.
More Related Videos
07:02The Preparation and Properties of Thermo-reversibly Cross-linked Rubber Via Diels-Alder Chemistry
Published on: August 25, 2016
07:15A Testing Platform for Durability Studies of Polymers and Fiber-reinforced Polymer Composites under Concurrent Hygrothermo-mechanical Stimuli
Published on: December 11, 2014
Related Concept Videos
Acid-Catalyzed Ring-Opening of Epoxides
Preparation of Epoxides
Epoxides result from alkene oxidation, which can be achieved by a) air, b) peroxy acids, c) hypochlorous acids, and d) halohydrin cyclization.
Epoxidation with Peroxy Acids
Epoxidation of alkenes via oxidation with peroxy acids involves the conversion of a carbon–carbon double bond to an epoxide using the oxidizing agent meta-chloroperoxybenzoic acid, commonly known as MCPBA. Since the O–O bond of peroxy acids is very weak, the addition of electrophilic oxygen of...
Polymer Classification: Architecture
Regioselectivity of Electrophilic Additions-Peroxide Effect
Structure and Nomenclature of Epoxides
Base-Catalyzed Ring-Opening of Epoxides