Topological optimization and fatigue life prediction of a single pad externally adjustable fluid film bearing

This work focuses on the prediction and comparison of the fatigue life of topologically optimized pads in an externally adjustable fluid film (EAFF) bearing. It integrates one-way/two-way fluid-structure interaction analysis, topological optimization (TO), and design modifications of the pad of an externally adjustable fluid film bearing. The major goal is to create an optimum pad design that minimizes weight and maintains structural integrity, and then to predict and compare the fatigue life of these alternative designs. The outcomes of the present study are as follows: (i) Two-way FSI results show a decrease of 65.64% in hydrodynamic fluid film pressure when compared to one-way FSI results because they take into account modifications in the fluid region's geometry caused by pad deformation; (ii) even though the maximum pad deformation in optimized pad geometry (Type-4) resulting from oil film pressure is relatively small (0.0036551 mm), the influence of pad deformation on the fluid domain due to hydrodynamic fluid film pressure cannot be understated; and (iii) when comparing the TO technique's results with fatigue life results, four elongated holes in the radial direction (Type-4) are most appropriate.