Reconfigurable multi-channel microwave photonic receiver for a multi-band signal based on cascaded microring...

What we believe to be a novel reconfigurable multi-channel microwave photonic (MWP) receiver for multi-band RF signal is demonstrated for the first time, to the best of our knowledge. A reconfigurable MWP signal processing chip based on two cascaded microring filter banks is employed in the proposed receiver, which slices the multi-band RF input into several narrow band signals and selects optical frequency comb lines for frequency converting of each channel. Due to the significant reconfigurability of the signal processing chip, the proposed receiver can flexibly choose the output frequency band of each channel, and thus different frequency components of the multi-band RF input can be down converted to the intermediate frequency (IF) band for receiving or converted to other frequency band for forwarding. A multi-band RF signal composed of a linear frequency modulation (LFM) signal with 2 GHz bandwidth and a quad-phase shift keyed (QPSK) signal with 100 Mbit/s rate is experimentally received and reconstructed by the proposed receiver, where the reconstructed LFM component exhibits a signal to noise ratio (SNR) of 10.2 dB, and the reconstructed QPSK component reaches a high SNR of 26.1 dB and a great error vector magnitude (EVM) of 11.73%. On the other hand, the QPSK component of the multi-band RF signal centered at 13.5 GHz is successfully converted to 3.1 GHz.