2 × 4 kW near-single-mode laser output assisted by an optimized bidirectional oscillating-amplifying integrated fiber...

Bidirectional output oscillating-amplifying integrated fiber laser (B-OAIFL) can achieve the two-ports laser amplification based on a single cavity, showcasing a promising prospect. In order to improve both the laser power and beam quality, we first simulate and optimize the stimulated Raman scattering (SRS) effect in the B-OAIFL. The simulation results show the SRS effect can be suppressed by optimizing the diameter as well as the length of the active fiber at different locations. With the guidance of theoretical and experimental analysis for the combined suppression of SRS and transverse mode instability (TMI), a near-single-mode B-OAIFL with 2 × 4 kW was demonstrated. Based on this foundation, we further devoted ourselves to the pursuit of the optimization of the structure and performance. The necessity of the configuration of side pump, which was initially introduced for its exceptional performance in stabilizing temporal chaos, was reevaluated in detail. With its negative impacts on efficiency improvement and SRS suppression were analyzed and verified, we removed this configuration and finally demonstrated a more simplified design with superior performance. A total bidirectional output of 8105 W was achieved, with an O-O efficiency of 79.6% and a near-single-mode beam quality of M _A ²∼1.36,M _B ²∼1.63. No signs of TMI were observed, and the signal-to-SRS suppression ratio was over 38 dB. The results still demonstrate a promising potential for power scaling based on this configuration and parameters.