Related Experiment Video
Updated: Jun 24, 2025

Transmission of Multiple Signals through an Optical Fiber Using Wavefront Shaping
Published on: March 20, 2017
SE-FSCNet: full-scale connection network for single-shot phase demodulation
Abstract:
The accuracy of phase demodulation has significant impact on the accuracy of fringe projection 3D measurement. Currently, researches based on deep learning methods for extracting wrapped phase mostly use U-Net as the subject of network. The connection method between its hierarchies has certain shortcomings in global information transmission, which hinders the improvement of wrapped phase prediction accuracy. We propose a single-shot phase demodulation method for fringe projection based on a novel full-scale connection network SE-FSCNet. The encoder and decoder of the SE-FSCNet have the same number of hierarchies but are not completely symmetrical. At the decoder a full-scale connection method and feature fusion module are designed so that SE-FSCNet has better abilities of feature transmission and utilization compared with U-Net. A channel attention module based on squeeze and excitation is also introduced to assign appropriate weights to features with different scales, which has been proved by the ablation study. The experiments conducted on the test set have demonstrated that the SE-FSCNet can achieve higher precision than the traditional Fourier transform method and the U-Net in phase demodulation.
Related Concept Videos
The Delta-to-Delta Circuit
Capacitance: Single-Phase And Three-Phase Line
Single-Phase Lines
Consider a single-phase, two-wire transmission line with equal phase spacing energized by a voltage source. One conductor carries a uniform positive charge, while the other carries an equal negative charge. The capacitance C of the line can be derived from the voltage V between the conductors. For a one-meter section of the line, the capacitance is given...
The Delta-to-Y Circuit
Double Resonance Techniques: Overview
Spin decoupling is usually achieved by...
The Y-to-Delta Circuit
The initial step in analyzing a wye-to-delta circuit is to assume a positive phase sequence. These phase voltages are then utilized to calculate the line voltages that occur directly across the delta-connected load impedances. Van, Vbn, and Vcn are the phase voltages in wye, and Vab, Vbc, and Vca are the line voltages for a delta circuit. The relation between...
Network Function of a Circuit

