Related Experiment Video
Updated: Jun 24, 2025

20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier
Published on: July 12, 2017
Highly efficient continuous-wave solid-state Raman crystal lasers at 555 and 559 nm
Abstract:
High-power efficient continuous-wave Nd:YVO4/KGW Raman lasers at 555 and 559 nm are achieved by using a double-sided dichroic coating output coupler to improve the resonance quality factor. The Np-cut potassium gadolinium tungstate (KGW) is used to generate the Stokes waves at 1159 and 1177 nm by placing the polarization of the1064 nm fundamental wave parallel to the Ng and Nm axes, respectively. The lithium triborate (LBO) crystal with the cut angle in the XY plane for the type-I phase matching is used to perform the intracavity sum frequency generation for yielding the green light at 555 nm and the lime light at 559 nm at the optimal phase matching temperature. Experimental results were systematically accomplished to comprehend the optimal cavity length for the conversion efficiency. Under the optimal cavity length, the output powers can reach 6.6 and 6.3 W at a pump power of 22 W for the wavelengths of 555 and 559 nm, respectively. The conversion efficiencies can be up to 30% and 28.6% for 555 and 559 nm, respectively.
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...

