Efficient treatment of secondary treated refinery wastewater using sand biofiltration: Removal of hazardous organic...

This study explored the potential of sand biofiltration for tertiary treatment of real refinery wastewater. The biofilter (2 cm (I.D.) x 15 cm (L)) operated on secondary treated refinery wastewater at flow rate of 1 mL/min had empty bed contact time (EBCT) of 47.12 min for one circulation. Maximum reduction in COD after 4, 8 and 12 times recirculation was 25 %, 52 % and 56 %; while the TOC reduction was 33 %, 43 % and 51 %, respectively, after biofilm development over 30 days. Quantification using two dimensional gas chromatography - time of flight mass spectrometry (GCxGC-TOF MS) revealed that several of the identified target compounds could not be detected in the wastewater after 12 recirculations. After 8 times recirculation, most of the compounds showed very high removal efficiency. For biofiltration over the flow rate range 2-10 mL/min, the reduction in COD and NH₄⁺-N ranged from 62-73 % and 78-86 %, respectively, after 8 times recirculation. The nitrite concentration first increased and subsequently decreased, while the nitrate concentration continuously increased with increase in the number of recirculations. Solid phase micro-extraction (SPME) analysis of the aqueous phase using GCxGC-TOF MS and a semi-quantitative approach indicated that the removal of predominant classes of compounds was greater than 95 % after 8 times recirculation, with maximum reduction occurring in the first pass through the biofilter. Assimilable organic carbon (AOC) reduction was 98 % after 8 times recirculation. Metagenomic analysis revealed that Proteobacteria was the most dominant phylum in the biofilter. Many known polynuclear aromatic hydrocarbon (PAH) degraders, such as Sphingomonadales, Burkholderiales, Rhodobacterales and Rhodospirillales, were found in the biofilter leading to high removal efficiency of hazardous organic pollutants.