Related Experiment Video
Updated: Jun 24, 2025

Quantification of Polybutylene Adipate Terephthalate-based Micro- and Nano-plastics from Soil Using Proton Nuclear Magnetic Resonance Spectroscopy
Published on: June 6, 2025
Discrimination and simultaneous quantification of poly(ethylene terephthalate) and poly(butylene terephthalate)
Liqiang Lu1, Jiahui Tong1, Han Wang1
1Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan, 430074, PR China.
Abstract:
A method has been developed to quantify PET and PBT microplastics (MPs) based on depolymerization and detection of depolymerization products by gas chromatography-tandem mass spectrometry (GC-MS/MS) without a complex separation process from environmental samples. Under the optimal depolymerization conditions, PET and PBT were efficiently converted to ethylene glycol (78%) and 1,4-butanediol (87%), respectively. Subsequently, the linear curves were constructed between signal intensities of depolymerization products and polymer masses by GC-MS/MS, and the correlation coefficients of PET and PBT were 0.996 and 0.997, respectively. The spiking and recovery experiments of PET and PBT in the environmental samples showed that the recovery was stable in the range 89-100%, and the limit of detection was 4.95 μg and 1.39 μg of PET and PBT, respectively. The method has been proven to be capable of simultaneous identification and quantification of PBT and PET MPs in real environmental water samples without complex separation process, which provided a scheme for the determination of microplastics.
More Related Videos
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...

