Multimode interference methane sensor based on a ZIF-8/PDMS composite film

A multimode interference methane sensor based on a ZIF-8/PDMS composite film is proposed. The sensing principle is that the refractive index of the ZIF-8/PDMS composite film changes when it adsorbs methane, leading to a measurable optical path difference during the coupling of the cladding higher-order modes and the fundamental mode in the multimode interference fiber (MMI). The environmental methane concentration is then detectable by detecting the wavelength shifts of the interference peaks in the resulted spectrum. Through simulations and experiments aimed at enhancing sensor sensitivity, we optimized three parameters within the sensor structure: the length of the Tapered Single-Mode Fiber (TSMF), the composite film thickness, and the TSMF taper diameter. The experimental results indicate that the sensor's sensitivity reaches a maximum of 0.231 nm%^-1. Additionally, the sensor exhibits excellent structural stability and measurement repeatability. The response time is as short as 40 s, and the recovery time ranges between 3 and 5 min. The proposed multimode interferometric methane sensor based on the ZIF-8/PDMS composite film has great potential to support highly sensitive methane concentration detection in many applications.