Study on Formation and Migration Law of Foam in Fractures and Its Influencing Factors

This study focuses on the characteristics of foam generation, flow, and plugging in different reservoir fracture environments. Through visual physical model experiments and stone core displacement experiments, we analyze the flow regeneration of foam in a simulated reservoir fracture environment as well as its sealing and sweeping mechanisms. The findings reveal that low permeability reservoirs, with their smaller and more intricate fracture structures, are conducive to the generation of high-strength foam. This is due to the stronger shear effect of these fracture structures on the injected surfactant and gas mixture system, resulting in a denser foam system. Consequently, low permeability reservoirs facilitate a series of mechanisms that enhance the fluid sweep efficiency. Furthermore, the experiments demonstrate that higher reservoir fracture roughness intensifies the shear disturbance effect on the injected fluid. This disturbance aids in foam regeneration, increases the flow resistance of the foam, and helps to plug high permeability channels. As a result, the foam optimizes the injection-production profile and improves the fluid sweep efficiency. Stone core displacement experiments further illustrate that during foam flooding, the foam liquid film encapsulates the gas phase, thereby obstructing fluid channeling through the Jamin effect. This forces the subsequently injected fluid into other low-permeability fractures, overcoming the shielding effect of high-permeability fractures on low-permeability fractures. Consequently, this improves the fluid diversion rate of low permeability fractures, effectively inhibiting fluid cross-flow and enhancing sweep efficiency. These experimental results highlight the advantages of foam flooding in the development of complex reservoirs with low permeability fracture structures, demonstrating its efficacy in inhibiting fluid cross-flow and optimizing the injection-production profile.