Related Experiment Video
Updated: Jun 23, 2025

The Effect of Anodization Parameters on the Aluminum Oxide Dielectric Layer of Thin-Film Transistors
Published on: May 24, 2020
High-Performance TiO2/ZrO2/TiO2 Thin Film Capacitor by Plasma-Assisted Atomic Layer Annealing
Seunghyeon Lee1, Geongu Han1, Keun Hoi Kim1,2
1Department of Manufacturing Systems and Design Engineering, Seoul National University of Science and Technology (SeoulTech), Seoul 01811, Republic of Korea.
Abstract:
Although laminate structures are widely used in electrostatic capacitors, unavoidable heterogeneous interfaces often deteriorate the dielectric properties by impeding film crystallization. In this study, a TiO2/ZrO2/TiO2 (TZT) laminate structure, where upper-TiO2 deposited on the heterogeneous interface was crystallized by plasma-assisted atomic layer annealing (ALA), was investigated. ALA effectively induced the phase transition of the upper-TiO2 from the amorphous or anatase phase to the rutile phase, leading to an increase in the dielectric constant, whereas the ZrO2 blocking interlayer maintained the amorphous phase owing to the extremely localized effect of ALA. Consequently, through the layer-by-layer phase control of ALA, the dielectric constant of the upper-TiO2 was enhanced by 25% by applying ALA, leading to an increase in a capacitance density of 27% of the TZT capacitor, whereas a low leakage current density of ∼10-8 A/cm2 was maintained (at 1 V). In addition, the TZT capacitor on three-dimensional structures (aspect ratio of 5:1) shows a high capacitance density of up to 461 nF/mm2 owing to ALA.

