Related Experiment Video
Updated: Jun 23, 2025

Determining Viral Disinfection Efficacy of Hot Water Laundering
Published on: June 21, 2022
Sterilization efficacy of a homemade UV lamp system on ceramic and porcelain tiles
Dokyung Kwon1, Yongju Jo1, Youngku Sohn1
1Department of Chemistry, Chungnam National University, Daejeon, 34134, Republic of Korea. jkkim48105@cnu.ac.kr.
Abstract:
Ultraviolet (UV) sterilization of Bacillus atrophaeus spores attached to eight types of tiles, consisting of combinations of ceramic and porcelain, white and black, and matte and glossy surfaces, was investigated using a homemade UV lamp system with different irradiation times (10 s, 30 s, and 60 s) and UV lamp-to-tile distances (32 mm, 76 mm, and 120 mm). The results demonstrated a reduction in colony numbers with increasing irradiation time and decreasing lamp-to-tile distance, with nearly complete sterilization observed for a 120 mm lamp-to-tile distance with 60 s UV irradiation and for a 32 mm lamp-to-tile distance with 10 s UV irradiation. Specifically, superior UV sterilization efficacy was observed on porcelain compared to ceramic tiles, on white compared to black tiles, and on matte compared to glossy tiles, consistent with the reflectance trend. In conclusion, among the tested tile surfaces, the white matte porcelain tile exhibited the most efficient UV sterilization, attributed to its highest UV reflectance.
Related Concept Videos
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...

