Non-Isocyanate Urethane Acrylate Derived from Isophorone Diamine: Synthesis, Characterization and Its Application in...

In this paper, urethane-based acrylates (UA) were prepared via an environmentally friendly non-isocyanate route. Isophorone diamine (IPDA) reacted with ethylene carbonate (EC), producing carbamate containing amine and hydroxyl groups, which further reacted with neopentyl glycol diacrylate (NPGDA) by aza Michael addition, forming UA. The structures of the obtained intermediates and UA were characterized by ¹H NMR and electrospray ionization high-resolution mass spectrometry (ESI-HRMS). The photopolymerization kinetics of UA were investigated by infrared spectroscopy. The composite with obtained UA can be UV cured quickly to form a transparent film with a tensile strength of 21 MPa and elongation at break of 16%. After UV curing, the mono-functional urethane acrylate was copolymerized into the cross-linked network in the form of side chains. The hydroxyl and carbamate bonds on the side chains have high mobility, which make them easy to form stronger dynamic hydrogen bonds during the tensile process, giving the material a higher tensile strength and elongation at break. Therefore, the hydrogen bonding model of a cross-linked network is proposed. The composite with UA can be 3D printed into models.