Assessment of the Influence of Fabric Structure on Their Electro-Conductive Properties

Electro-conductive fabrics are key materials for designing and developing wearable smart textiles. The properties of textile materials depend on the production method, the technique which leads to high conductivity, and the structure. The aim of the research work was to determine the factors affecting the electrical conductivity of woven fabrics and elucidate the mechanism of electric current conduction through this complex, aperiodic textile material. The chemical composition of the material surface was identified using scanning electron microscopy energy dispersion X-ray spectroscopy. The van der Pauw method was employed for multidirectional resistance measurements. The coefficient was determined for the assessment of the electrical anisotropy of woven fabrics. X-ray micro-computed tomography was used for 3D woven structure geometry analysis. The anisotropy coefficient enabled the classification of electro-conductive fabrics in terms of isotropic or anisotropic materials. It was found that the increase in weft density results in an increase in sample anisotropy. The rise in thread width can lead to smaller electrical in-plane anisotropy. The threads are unevenly distributed in woven fabric, and their widths are not constant, which is reflected in the anisotropy coefficient values depending on the electrode arrangement. The smaller the fabric area covered by four electrodes, the fewer factors leading to structure aperiodicity.