Sonochemical oxidation activity in 20-kHz probe-type sonicator systems: The effects of probe positions and vessel...

The 20-kHz probe-type sonicator systems were investigated for the enhancement of the cavitational oxidation activity under various geometric conditions including vertical and horizontal probe positions and vessel sizes/volumes as a following study to our previous study. The sonochemical oxidation activity (mass-based I₃^- ion generation rate) increased significantly for all vessel size conditions as the probe was placed close to the vessel bottom, owing to the expansion of the sonochemical active zone induced by the reflections of ultrasound at the bottom and the reactor wall. A concentric circular active zone is observed at positions close to the bottom. The highest sonochemical activity was obtained at 1 cm (vertical position) in the 20 cm vessels (input power: 50 %). At the vertical positions of 11 cm to 7 cm, no significant difference in the sonochemical activity was observed for all input power conditions (25, 50, and 75 %) because no meaningful reflections occurred. Higher sonochemical activities were obtained at an input power of 75 % owing to the increased power and strong reflection. The highest cavitational yield considering the energy efficiency was obtained at 6 cm (vertical position) for 75 % of all power and geometric conditions. Horizontal probe position tests showed that the asymmetric formation of the sonochemical active zone could significantly enhance the sonochemical activity. The highest activity was obtained at 1 cm (vertical position) and 2.5 cm (horizontal position) in the 20 cm vessel.