Comparison of perfluoroalkyl substance adsorption performance by inorganic and organic silicon modified activated...

Owing to the persistence and increasingly stringent regulations of perfluoroalkyl substances (PFAS), it is necessary to improve their adsorption capacities using activated carbon (AC). However, their adsorption capacities are suppressed by dissolved organic matter (DOM). In this study, two ACs modified with organic silicon (C-OS) and inorganic silicon (C-IS) were synthesized and used for the adsorption of PFAS in raw water (RW). The results showed that the PFAS adsorption capacity of C-IS was much less influenced by DOM than that of the original AC (C-virgin). In RW, perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) adsorption capacities on C-IS were 15.08 and 3.65 times higher than those on C-virgin, respectively. DOM had less influence on the PFOA and PFOS adsorption kinetics of C-IS than C-OS and C-virgin. Under multi-PFAS condition, C-IS also exhibited slower desorption of short-chain PFAS and breakthrough in batch and column tests, respectively. Characterization of the ACs before and after adsorption and independent gradient modelling indicated that hydrogen bond interactions between the O-Si of C-IS and the -COOH or -CSO₃H groups of PFAS contributed to PFAS adsorption. Density functional theory calculations demonstrated that the adsorption energy of C-IS was much lower than that of C-OS and C-virgin. The arrangement of PFAS molecules on C-OS was chaotic owing to the hydrophobic siloxane chain, whereas the arrangement of PFAS on C-IS was orderly in multi-layer or semi-micelle status and more favorable to PFAS adsorption. This study provides a new strategy for avoiding adverse effects of DOM on PFAS adsorption.