Related Experiment Video
Updated: Jun 23, 2025

Preparation of Expanded Chitin Foams and their Use in the Removal of Aqueous Copper
Published on: February 27, 2021
Target reliability-based design optimization studies on cohesive soil amended with chitosan and casein for liner
Romana Mariyam Rasheed1, Arif Ali Baig Moghal2, B Munwar Basha3
1Department of Civil Engineering, TKM College of Engineering, Kollam, 691005, India.
Abstract:
The current study investigated the primary and secondary compressibility characteristics of organic clay with two biopolymers, Chitosan (Dch) and Casein (Dca) at dosages of 0.5%, 1%, 2%, and 4%. The primary compression index (Cc) values were reduced by 18% and 59% at dosage (Dch and Dca) of 4% at a consolidation pressure of 800 kPa. The secondary compression indices of chitosan and casein-treated soils fell below the normal range specified for organic soils and lay in the range of 0.01-0.017. The biopolymers also accelerated the consolidation process at all dosages (Dch) and 2% Dca. The hydraulic conductivity increased for all dosages of chitosan whereas it declined for all dosages of casein compared to untreated soil. The reliability analysis was conducted for biopolymer-treated soils and presented a rational approach toward the selection of a suitable liner. Chitosan failed to achieve a target reliability index of 3 whereas casein-amended samples attained values equal to and greater than 3 at all dosages and consolidation pressures at COV of Kmax = 20%. At all dosages, the casein-treated soils exhibited reliability index values greater than 3 up to COV of Kmax = 40% indicating the higher stability of casein mixes as a liner material.
Related Concept Videos
Design Example: Managing Concrete Workability
Waterproofing and Anti-Bacterial Admixtures in Concrete
Waterproofing admixtures render concrete hydrophobic,...

